Final stages approatcheth, supposedly

At last this thing is getting to the finishing stages.

Or at least until I notice some sort of a gigantic mistake and have to go and fix it. But that's how it goes, onwards with a ton of foul words. The theme for this sprint is: trying something new (to me) yet again.

To me the FlaK looked a bit too clean and nice, the basic Dunkelgelb felt like it was eating details. I was pondering on the correct term and googled around for nothing useful. Obviously I came up with the word on my way to work: filtering. That wasn't what I meant in the end, but at least I got to read about something new.
So I dug up my ancient jar of GW Black Ink (I still can't understand why "Wash" wasn't good enough for them...), but over the years it had gone a bit thick. So I thinned it down quite a bit and tested on the bottom of the gun. Goody goody, I painted (or washed) the rest of the model with that. As far as I've understood, the point is to get the thin liquid into the recesses and notches of the model so they get articulated a bit. At the same time the dark paint dims the original bright colour and at least in this case gave the model a bit of a "this thing has spent a while in the rain". Which is exactly what I wanted to achieve.

Of course I had forgotten that the gun looks a bit better if it has all the elemental pieces in it. I cut the ammo cartridges off the sprue, painted and later put them into their places. In the photo they're just cleaned and tried if they even fit there:

After making a bit of a mess and letting the glue dry I attempted to put the shield halves in their own slots. Of course they didn't fit nicely so I had to thin the connectors a bit, let's see if I end up pinning one or both of them.
Sometimes this model is really flimsy and the structure worries me a lot, sometimes it's just really good. It's a weird kit all in all, but I'll rant about the general feeling when it's time.

Tapeage, dammit!

So I began my latest attempt at painting camouflage. First I sliced stripes of masking tape to make a bunch of narrow ones, which I then put on the model at nice intervals:

Next I masked every other "slot" to avoid excess amount of paint going to places it wasn't supposed to go to. The remaining uncovered areas I sprayed with my trusty green.

After drying over a night I ripped off the tape pieces I had previously put there (it looked quite interesting at that point already) and masked the parts I had painted green. One of the fenders had some paint torn off with the tape:

So after another night I removed the rest of the tape and observed what I had done. The result looks fun in a way, the effect is intriguing. It's just a shame that the left fender had a large-ish area of paint torn off and I have no clue how I managed to fail so badly with the tape. Especially as that's the only place where it took 2+ layers of paint with it...

Despite a tiny setback like this my approach worked surprisingly well. Maybe I should reconsider those colours, because it looks more like a bamboo-forest than something that'd work in a central Europe. But then again, maybe it'd work even in that forest behind this building... I'll have to try to weather it a bit as well so maybe that'll tone it down a bit.

The real end result will be seen when the whole set is finally assembled instead of being spread around different tables. But that'll take a couple more days. Or a couple dozen. We'll see.

My TODO list is growing

Last Friday I got happy when HLJ informed me that they've sent my order already.

Today I got even happier when a FedEx dude called in the mid-morning and asked when he can deliver my "packet from Japan". They ended up bringing that thing to my workplace so I (and they) didn't have to wait until the evening, which was nice :) My coworkers at least had fun with my reaction.

That box was nicely light and not too big to carry around. Unlike the other item of the day, but more about that in a while.

Confusingly the boxes of the models weren't of the same size, but then again, the machines aren't equally sized so I guess it's not that weird after all. I've just grown used to the "normal" model boxes that are more or less standardized or something.
The names that are printed on the boxes are to be ignored, for they're going to be handled as forbidden "Unseen" 'Mechs of the BattleTech universe. That cool looking thing on the left is one of my all-time favourites: a Marauder IIC and the one on the right is a Warhammer IIC. In this case letter C tells everyone that it's a Clan variant. Any of those toys of the freebirth scum aren't supported. Unless we're talking about miniatures for tabletop gaming, of course, because that's not as strict as collecting. Playable buttons can be whatever is needed or felt like - these things just aren't for playing.

These seem to be made of very few pieces, but these aren't any highly detailed Panzers anyway. We'll see if I manage to finish one or both of them for Model Expo 2011. One can always hope.

I got something done for the current project, as shocking as it might be. Earlier I complained that excluding the wheel hubs the camo pattern I tried to paint ended up looking more like fruit turron than a weapon. So more painting was to be done. Yesterday I remembered that I had seen an interesting pattern in one of my modeling-related RSS-feeds but coulndn't find the pic I was looking for. This one has that same pattern implemented but the photo itself is somewhat darker and less clear than in the one I originally found. Just before writing this post I painted over my fuckups with Dunkelgelb and will continue tomorrow with some masking and painting. Luckily I hadn't wasted a horrible amount of time with that so far.


Oh, the 10kg packet I mentioned earlier. I finally received the packet I sent to myself over two weeks ago: the Complete Calvin and Hobbes Collection. Damn, it took ages to travel these 2670 kms... and it was slightly damaged as well. I don't think I want to know what all these logistics-people do to luggage and postal packets because they're always (or way too often) completely mashed. Oh well, in the end all that matters is that my precious is where it belongs. Here:

In addition to all that the wise guys (three wise kings, or Reyes Magos as the story I was told says) brought me Fallout New Vegas, it also eats my free time. Between all the other weird things I do it's just nice to go to the Nevada desert and beat several - more or less innocent - bystanders to pulp with a Sledgehammer 8) The previous Fallout ate something like 103 hours of gaming time on the first round, this one has taken almost 10 after the first couple of sessions. And I'm just in the beginning... There are many more interesting games coming along the year for both systems we have around here, both with completely different kind of material.

At least I'm not going to run out of stuff to do. In a good way.

New year, more stuff to do

The year has changed and I ran out of holidays.
Our suitcases finally got here this night with their valuable contents. Only 3 days late. Once again.

The spanish santa brought a couple of new models to work on: the first one is Revell's easykit X-Wing that doesn't officially require paints or glue. We'll see how that turns out, I expect some extra work anyway. Oh, and I haven't built a single terrorist model at all, for I've always stayed on the better side of the Empire. I guess santa didn't know and I don't mind :)

The second one is a Tamiya SdKfz 251/1 with a couple of dudes. For them I had to buy a bit more paint so I can do the skin. My ancient Citadel skintone paints have gone dry ages ago so I went with more Vallejo products. I also trust that the Tamiya halftrack is a lot nicer to build than the Panzerwerfer by Trumpeter or Italeri, years ago. That was awful.

I also made an order to Hobby Link Japan, one that I've been pondering about for more than a year. The ptb of BattleTech went and copied some Macross-designs to their game and these things are the original Marauder and Warhammer in scale 1:100. They'll end up on the end of my FiFo todo-list, whenever they arrive.

My OmniMech miniatures should also be finished, they've only been more or less wip for almost two years now. I'm somewhat ashamed of that. My new dremel pieces are also begging to be used. I'll get there eventually...

At least I'm not going to run out of stuff to do :)

Time was of the essence

No, I didn't have enough time to finish the FlaK. I'll finish it next year, it made no sense to ruin the model by hurrying too much.

I continued painting the camo with the green and kept using the same stencils. The wheel hubs ended up being awesome - the rest didn't. Both the fenders and shield halves look more like mouldy bread than parts of a war machine.

Sigh.

Anyway, the idea works, I just have to improve the stencil so it works better with the pieces I want to paint. This "one masking piece works everywhere" doesn't work too well, apparently. It wasn't a horrible defeat, it just requires a bit more work. And not horribly much of that, after all, just some modifications. If I remember, I'll post some proof next year.

Now completely off-topic for the whole blog: tomorrow we'll take a flight somewhere else and we'll see if the yule goat brings something nice for my hobby or if I have to go and get everything myself :) Eating well at those latitudes is a given, at least for someone like me who doesn't exaclty love the traditional foodstuffs.

May the next year be more active than this one - for each and every one of us 8)

First mottling attempt

Earlier this week I got this thought in my head that the air can that I started in the summer might not be that good anymore. So I took and changed it to the new one. And himmel, the new one shot air like a storm wind unlike the previous one that was closer to a lungless chainsmoker... If those cans run out that quick with my ways of working, a compressor might not be a bad idea at all. As long as they don't cost monkeys covered in chocolate.

The main thing is that now the model is nicely covered in Dunkelgelb and no basecoat is visible anywhere. *cough*

So I decided to take and attempt the "mottle camo" idea I was talking about the last time. I also happened to have a bunch of small cardboard pieces that were protecting the photo-etch pieces. They were a bit big for what I had thought, but then again, it's better be safe than sorry. Especially knowing how my experimentalism usually ends up.
Anyway, if that ends up looking even half-decent and keeps the rest of the model clean, I'll call it a victory. To begin with, I decided to start with the brown and maybe go for the green tomorrow when everything's nicely dry. Unless I have to go back and cover everything with dark yellow again. Judging by the stencil itself after use, maybe I should've adjusted the airbrush head to be a bit smaller, to avoid wasting that much paint:

The wheel hubs were the first victim of mine, they ended up looking pretty fine to me. Encouraged by this tiny victory, I turned my attention towards the shields and the fenders. They didn't end up looking as nice, but we'll see how it all goes when I've added the green as well:

You can see some splashes and shit, some of the blots aren't quite what I was going for but then again, this was my first attempt and if you don't count the wheels in, all the pieces were a bit "funny" to paint by their shape / size. I believe this'll be a lot more doable with testing and developing (a couple of dozen iterations maybe?) and quite nice looking, too :)

To finish up my evening's painting session I took my paintbrush and started painting the gun's barrels back - again. I'm afraid I have to throw that brush away or redelegate it to weathering, because it's not useable for small details or finishing touches anymore. Oh, I had almost remembered to attach the armour pieces to the barrel-thingies that I forgot to use ages ago. You can see them in the photo, but for some reason I managed to take this pic from an angle that mostly hides one of the left side barrels.
But these aren't final pics but just stuff I take on the go to post here, so who cares at thise point? For that same reason I don't modify them more than just cropping and downscaling.

As a nice end a photo of that damn gun from another angle, that traditionally shows that no, there's not enough paint inside the muzzles after all. How the hell does this always happen?

If I get to "finish" this model on the weekend, as I'm insanely half-expecting, good. Otherwise it's going to be finished next year.
How exciting!

Trickery of random quality and some painting at last

So I finally got the basecoating redone (as I had originally intended). Because it's so damn cold and dark in the balcony at this point, I decided that the kitchen is a really good place to paint with the airbrush. I mean, those Vallejo model air paints don't really smell, unlike that sprayable primer.

The first pic shows the gun right before re-basecoating. I had to do some trickery to get those photo-etch pieces stick. A trick that I had come up with with my OmniMech projects: my modeling glue and some white glue. If you use a thin layer of white glue on the other metallic piece and and some liquid glue on the other piece, they set very quickly when they get in contact. It's pretty handy with pieces like this that don't have much contact surface to begin with. And when the liquid glue either dries too quickly or way too slowly.
Maybe it looks a bit silly from a certain point of view, but who cares if I get the thing done so you can see at least something in the first place? :P

First I had to clear some space on the desk, then dig up for all the junk like the canned air, my breathing mask and the painting box. Something was missing. That damn airbrush of course. Back to the storage room it was.
Luckily this apartment is so small that you can't really lose anything forever (sarcastic reference to my military passport, wherever the hell you are).

I had decided earlier, that the FlaK shall be mostly painted in dunkelgelb, with a couple of camo stripes on the shield halves, fenders and the wheel hubs. The biggest single parts, that is. When this dark yellow is fine enough after a couple of layers, I'll repaint the gun barrels black and then go for the camo.

Maybe I'll try to come up with a stencil of sorts to make a ridiculous attempt at a mottle camo, I saw that in FSM's rss feed, regarding the mottle camo on a Luftwaffe plane. I think it sounds cool and I should maybe try.

The rest of the pieces:

The point is to make a stencil and keep it slightly off the model while you paint with the airbrush. This way you end up nice, soft edges to the camo. At least that's in theory and what the übergurus accomplish. I'm not a guru, as we've noticed quite a few times already...

And now that I think of it, I'm almost in a hurry already if I want to get this project finished this year! The last 1,5 weeks I'll be abroad and I guess that the last days before flying will be busy enough so I won't have that much time to waste with silly things like this. We'll see.

Swearing and crawling ahead

That photo-etched shield has been a huge problem. Damnit. Maybe this can be salvaged somehow, but it doesn't look too bright at the moment.

To compensate for the slowness of the shield building, I started to work on the carriage. I haven't got too far with that, either, but at least I've got something done for real instead of regluing metal pieces back together after they've broken off for some stupid reason....

Photos? Haven't bothered taking them because the slowness annoyed me too much. I mean, "yay, I got four pieces built" doesn't really make cool pics. Maybe next week.

Love 'em, hate 'em

Photo-etched parts.
I can't get around how weird they are. They're awesome with all the details and true-to-scale size, at least moreso than plain plastic pieces. Bigger parts like grilles, handles and armour plates have never been a problem of any sort, they're nice to work with.

But those 1,5mm x 1,5mm buttons that are to be bent with some dark magicks to form a couple of 90º angles and after that they need to be glued to the model - when the glueable surface is close to nothing... Or those slightly longer but somewhat narrower pieces that should be bent as well and then connected to the aforementioned part. Flaaaaa.

Usually those things are done with more or less swearing, and done, not skipped. More or less twisted but hey, I don't own any precision instruments for these things - yet. From the PE pieces of this kit a few have made a nice "ka-zing!" sound followed by some clicks when they've fallen on the floor, never to be found again. Oh well, what can I do? I tried, then gave up and the vacuum cleaner shall solve the problem of the lost pieces.


Now, after another deep breath, I'll keep reporting.
In the early week I fixed the ammo cartridge holders (it was somewhat frustrating at times). Maybe a couple of the separators went wrong but I imagine I'll get to fix them if needed. If not, I'll claim that the crew broke them. You know artillerymen and how they are ;)

Next I attacked the targeting equipment. Nothing awful happened, building was fun and quick. At least if we forget that the PE-crosshair device broke off at least five times, that's why it's missing from this photo:

This evening has seen me fighting with those ridiculously tiny pieces and while a bunch of them were drying, I built the base of the gun (all seven pieces). I also tried if the gun even fits on that thing, it did. Goody.
This photo has the upfolded loader's chair-thing drying. The left one shall wait in peace, because I had to mengelify those pieces off, they weren't designed to be reattached... so we'll see how they end up. Or where.

The model looks a bit weird at this point, but it's just because the flat gray basecoat is a bit difficult for the eyes to get a hold of. Or that's what I tell myeslf.



I really, really shouldn't have said that this is almost done in the previous post :P

A piece at a time

I got to build over a couple of days, but didn't get too far anyway. A piece at a time, so I don't have to go for a new project too soon. Doesn't look like this'll take horribly long build-wise, it has so few pieces. Maybe planning the painting will take more time than the rest of the project together?

Famous last words, anyone? Maybe I'll get to regret them the next time already...

There's nothing too special about these photos: barrels are attached to the rest of the gun and the base is more or less done already. Mostly that seems to be just the controls for aiming the gun in x and y axises. Being quite uneducated about AA-guns, I assume that the x-axis traversal is being controlled with those pedals:

Now if I could remember, what's going to end up hiding that hole on the rear part of the cradle, I'd be a lot less bothered by this picture. I also had to cut a couple of extra pieces off the "platform", looks like that went well for a change.

I got to the photoetch-parts, as you can see. Those still need some extra pieces in them, but I'll wait until the glue keeping the boxes together dries first.

Only when I was checking the latest wip photos, I noticed that the left and right side guns are not pointing at the same direction. Got to do something about it.

It'll be awesome 8)